8ton Medium Frequency Induction Furnace
8t energy-conservation medium frequency induction furnace
(steel shell with magnetic yoke hydraulic tilting)
1. Model number: Rated capacity of furnace 8ton, rated power of medium frequency supply 4000KW.
Power Consumption: 550/600 kwh/T
2. Complete set supply range: Furnace body 2set, furnace tilting device 1set, water cooling cable (6m) 8set, medium frequency supply cabinet 2set, capacitor cabinet (open type) 1set, low voltage distribution cabinet 2set, capacitance tank cabinet 1set, power tank 2set, hydraulic station system 1 set, water temperature and water pressure alarm 1set, furnace leak alarm 1set, the connect cable of medium frequency supply cabinet and capacitor cabinet 2piece, crucible 1set, Φ28 seamless steel tube 30metre, spare parts of equipment: KK 1piece, KP 1piece, master control board 1piece.
3. Technical specification: 6-phase incoming voltage of medium frequency supply source 950V, 12 pulse rectifier, output voltage of medium frequency supply 1650V. Rated power 4000KW, furnace body length4000, width3780, height3100, inductor inner diameter Φ1260, pillar height 2000.
4. Fit out components: Silicon-controlled rectifier (SCR) for KP tube 1500A/3500V 12 set; KK tube 2000A/2500V 16 set(connecting in series-parallel), low-voltage distribution cabine1000V/2500A with 2 universal circuit breaker, capacity of compensate capacitor 40000kilovar.
5. Furnace tilting type: Hydraulic tilting
6. Master control board: The control circuit used one single master control board, it designed to be whole, and reduced connecting line greatly, fixed reliability, so avoided safe failure. This control circuit board is high degree of integration, the α Angle automatic adjusted especially, that let power output of the equipment always was on constant condition, and electric power can be saved over 3% in comparison with same kind product. Safe start-up and automatic frequency-sweep.
7. Customer service: Debugging, all the costs of seller's experts go and work at abroad for return air tickets, accommodation and meals, will be borne by the buyer. The debugging period is 5 days, overstep the set time the buyer shall compensate the experts at USD 150 per day for delaying time. The seller should be responsible for the scene testing; After normal melting the seller should be responsible to guarantee repair or change of the faulty components in 6 months, such as master control board\reaction\compensate capacitor\hydraulic device\breaker\and furnace shell (except for lining break through, stoppage or shortage of cooling water supply for components).
8. Price: USD FOB Shanghai
9. Team of payment: Buyer pay 30% of full value in advance, when the goods deliver the buyer pay 70% of full value.
We produce high quality DC motor
1. Model-YRKK560-8
2. AC Slipping
3. 415V
4. 900KW
5. 750-RPM
6. 50Hz
7. Cooling IC611
8. Protection:IP54 (Total Enclosed)
9. Mounting:IMB3
10. Frame:560MM
11. Duty:SI
12. SKF Bearing
dust removal equipment water bath dedusting equipment
Features of electric furnace dust removal system:
1) Dust removal system equipment has strong reliability, not affecting the normal operation of smelting, easy for maintenance.
2) Gas flue capture mode belongs to the whole process of capturing.
3) Gas flue capture rate is more than 98 percent, can achieve plant roof, can not see smoke
4) Dust collection efficiency is more than 99 percent
5) Dust concentration in the workshop is less than 10mg/m3.
6) Low cost for long-term operating , stable efficiency
7) The wind engine noise is less than 80dB.
8) The flue has no dust fouling phenomenon
9) Dust collecting volume is more than 12Kg / t steel
Induction furnace is used for smelting or insulating ferrous metals, non-ferrous metals, sponge iron, such as scrap iron, scrap steel, copper, aluminum and so on. Complete working equipment such as continuous casting machine, rolling mill, mainly used for the production of billet, steel bar, angle steel, H-beam, I-beam, etc. Using KGPS, IGBT, single or double power supply technology, PLC (Siemens) can be realized throughout the monitoring.
Main supply list: 2 sets of electric furnace body, 2 sets of hydraulic or mechanical tilting electric furnace mechanism, 1 set of control platform, 1 set of intermediate frequency control cabinet (6 pulse 1, 12 pulse 2, 24 pulse 4), low voltage control cabinet (6 pulse 1, 12 pulse 2, 24 pulse 4), 1 set of capacitor cabinet, 4 or 8 water-cooled cables; 1 water temperature alarm, 1 leakage alarm; 1 crucible mold, 1 liquid One batch of pressure steel pipe, one set of copper row, three water tanks. Transformer, cooling tower, furnace builder, furnace lining ejector, furnace cover.
Product Model: GW1.5-IGBT-1300-0.5-B
Dual output with a set of power supply, can supply power to two sets of furnaces simultaneously, to achieve "one for two", total power can realize stepless free distribution on two sets of furnaces. Equipping two sets of furnaces, one is used for melting or heating refining , the other is used for insulation and casting, and two sets of furnaces can mutual replace to use. Medium frequency power supply device of IGBT transistor module can be used for melting, induction heating, heating treatment.
Main Technical Parameters
| No. |
Item |
Technical Parameters |
| 01 |
Furnace rated capacity (steel) |
1.5t |
| 02 |
Rated power of medium frequency power supply (1000+300) |
1300kW |
| 03 |
Maximum power of single furnace output |
1000kW |
| 04 |
Rated frequency |
500Hz |
| 05 |
Working temperature |
1600ºC |
| 06 |
Melting rate(Rated loading material, concentrate, density, the third furnace, auxiliary time not counting) |
1.6t/h |
| 07 |
Power consumption(Rated loading material, concentrate, density, the third furnace, auxiliary time not counting) |
600kWh/t |
| 08 |
Cooling water consumption- medium frequency power supply cabinet |
30m3/h |
Supply Range of Complete Set
| No. |
Item |
Unit |
| 01 |
IGBT-1300(1000+300)-0.5-B medium frequency power supply device of transistor module |
1set |
| 02 |
"Medium frequency power supply cabinet using closed cycle water cooling device"(Set in the rectifier cabinet) |
1set |
| 03 |
Air conditioning refrigeration equipment (Set in frequency power supply device) |
4 sets |
| 04 |
GW1.5t Melting Furnace |
2 sets |
| 05 |
Hydraulic actuator(including hydraulic pump station, console, hydraulic oil tubing) |
1set |
| 06 |
Water-cooled cable |
8sets |
| 07 |
Cooling water dispenser(used for inductor and water-cooled cable) |
2 sets |
IGBT Dual track working GW1.5-IGBT-1300-0.5-B
IGBT technology b GW3-IGBT-2000-0.2-B
furnace with cover GW1-IGBT-800-1-B
KGP-7t-5000-dual
We provide PS steel chip crusher 2018
PS series steel chip crusher, used to crush all kinds of car scraps, shavings and cuttings into 20-50mm scraps, in order to enter the chip and machine (metal chip briquetting machine) for briquetting treatment.
[Features]
1 Hydraulic system is adopted to effectively solve the overload protection problem;
2 Hydraulic motor, high torque, saving power;
3 PLC control.
Version:0.9 StartHTML:0000000105 EndHTML:0000011308 StartFragment:0000000141 EndFragment:0000011268
List of 450 heavy scrap crusher
Serial
number Name Specifications
(mm) Qty Remarks
1 Crusher shell 50mm 1 set Q235, plate thickness 50mm
2 Host hammer High manganese
steel 1 set 16 pieces, each hammer
head 80kg
3 Circular cutter High manganese
steel 1 set 16 pieces, 45kg for each
round cutter
4 Rotor disc φ1100 1 set Outer wear electrode welding
5 Spindle Diameter 390mm 1 root
6 Sieve plate φ65×100 1 set Steel casting ZG45
7 Motor 220KW 2 sets
8 Starting cabinet Soft start 1 set Control equipment operation
9 Hydraulic pumping station Matching 1 set
Unpacking cylinder, movable
plate cylinder,
Forced feed cylinder
10 Dust removal system Matching 1 set Cyclone dedusting,
pulse dedusting
11 Feeding machine 1 set
12 Magnetic separator 1 set
13 Loader heavy conveyor 1400×12000 1 set
14 Discharge belt conveyor 1000×10000 1 set
15 Belt conveyor 1000×8000 1 set
16 Waste belt conveyor 800×6000 1 set
1.Product principle and Application
The crushing production line uses the principle of hammering. Under the drive of a high-speedand high-torque motor, the hammers on the host rotor take turns to hit the objects to be crushed in
the cavity. Through the space formed between the liner and the hammers, After the crushed object
is torn into a crushed object conforming to the specifications, a high-quality crushed material with
high purity can be obtained under the action of a magnetic device.
This production line is used to process waste car body, tinplate, household appliances,
bicycles, empty cans and other lower scraps to make it into a superior steel making raw material.
The machine continuously crushes, removes the coating film, increases the specific gravity of the
volume, prevents the electric furnace from exploding, and improves the water output rate under
certain conditions.
2.Technical conditions
1.1 (1) Ambient temperature: -20 ºC -40 ºC
(2) Production staff: 3-5 people
(3) Installation method: According to the installation diagram, the technicians guide the
installation
1.2 Power supply
(1) Three-phase four-wire 380V AC (±10%), 50HZ (±2%)
(2) Low-voltage power supply of the equipment: 380v / 50hz;
Working lighting power: 220v / 50hz;
3.Processing object
1. Waste car body (excluding engine, reduction gear box, tire, etc.);
The 450KW crushing line needs to be broken into squares not larger than 800mm * 800mm
when crushing colored steel tiles.
2, Tinplate (cans, etc.)
3. Iron sheet for home appliances (excluding motors, compressors, shafts, etc.)
4. ≤6mm light and thin materials and similar domestic waste
25, Empty cans (wash out thin materials, coatings, etc.), non-sealed cans.
Note: After all the processed materials have been preliminarily processed, the shape and
volume need to ensure that they can smoothly enter the main machine inlet. (Such as cans, small
paint buckets, color steel tiles, car shells, etc.)
4.Not suitable for broken objects
1 Dangerous things:
a Sealed container, conduit, etc .;
b. Items that may cause an outbreak, fire, etc .;
2 Scrap cars:
a. Subjects other than passenger cars;
b. Engine, converter, differential gear, tire;
){kind=link}