SD0806 High Quality Metal Casting Sand Multi-Contact Moulding Machine

• Customization: Available
• Type: Injection Blow Molding
• Structure: Vertical and Horizontal Composite
• Model NO.: Molding Machine
• Plasticizing Way: Reciprocating Type
• Clamping Way: Hydraulic & Mechanical
• Automation: Automatic
• Computerized: Computerized
• Certification: CE, ISO9001:2008, GMP, QS
• Product Name: Molding Machine
• Transport Package: Plywood
• Specification: Standard specification
• Trademark: semc
• Origin: China
• HS Code: 8456909000
• Production Capacity: 10000set/Year

Product Description

Product description
This machine can be used for molding clay sand upper and lower boxes in various casting workshops. It can be used by a single machine or a mechanized assembly line or a semi-automatic line.
The main features of this machine are as follows:
1. Pneumatic multi contact compaction is adopted, without the trouble of oil leakage; the specific pressure is moderate, without special requirements for molding sand, and the number of contacts is large, which is suitable for complex model modeling.
2. When the machine is compacted, the frame is not stressed, but four pull rods hang down from the side of the multi contact body to hook the working table. With the downward extension of the multi contact, compaction is carried out. If the contact, hook, sand box, shaped plate and working table are regarded as a system, this kind of compaction strength is internal force or internal force compaction.
3. The contact is compacted by sand mold on the one hand and vibrated together with the workbench (separated from the rack, the rack will not be vibrated). Therefore, the impact compaction effect is good, the hardness of sand mold is high and even (the average hardness is 85-90, the hardness of B-type hardness tester), the sand consumption can be as small as 20-30mm, the sand consumption ratio can reach H: B = 2-3, and the hardness of vertical surface of mold cavity can still reach more than 80.
The machine adopts spring full buffer pneumatic micro vibration mechanism, so there is no special requirement for the foundation, and the connecting rod is used for formwork lifting.
Synchronous shaft structure, air pressure oil speed regulation, good mold starting synchronicity, and free speed control.

Product Name	SD0806 High Quality Metal Casting Sand Multi-contact moulding machine
Sand box size	1520×1220(1320)×190mm
Maximum dimension of sand box	2100 × 1320 × 190mm
Worktop size	1980 × 1030mm
Normal working air pressure	≥ 0.55mpa
Number of multiple contacts	60
Contact compaction stroke	250mm
Stroke of mould cylinder	350mm
Diameter of mould cylinder	Ф 160 × 2

Resin sand regeneration, molding line and chromite sand separator
 

#	Equipment	Type	Parameter	QTY	Power(KW)
B01	Shakeout and crushing machine	LPZ10	The table is 2500x2000mm. German owned Baofei Uster vibrating motor, maximum load 10T, 8.5KWx2	1	17.0
B02	Magnetic separator	S528II	Width=300mm,magnetic field intensity2100GS	1	0.4
B03	Chain Hoist	NE30	Height=17.5m, conveying capacity: 35m^3/h,Volume of bucket: 10L,pitch of buckets: 0.6m	1	11.0
B04	Regeneration machine	S528IVA	Vortex current regeneration,Secondary regeneration, centrifugal impact film removal	2	44.0
B05	Friction regeneration machine		Capacity: 10T/h	1	48.0
B06	Bucket elevator	S528VII	Width=350,Height=12.5m,High strength tape	1	5.5
B07	Vertical air separator ash remover			1	0.0
B08	Bucket elevator	S528VII	Width=350,Height=13.8m,High strength tape	1	5.5
B09	Sand temperature modulator	S528VIA	The sand temperature can be preset in the PC according to the process, the seamless pipe type water-cooling pipe and the water pump.	1	5.0
B10	Bucket elevator	S528VII	Width=350,Height=13.8m,High strength tape	1	5.5
B11	Air control single gate valve	TYM1	Cylinder controlled sand flow rate	10	0
B12	Pneumatic transmission	Y918	Transmitter 0.8m3, 2 unloading points, supercharger, etc.	2	0
B13	Bucket elevator	S528VII	Width=250,Height=12.4m,High strength tape	1	4.0
B14	Pneumatic transport (transmission of chromium ore)	Y915	transmitter 0.5m3, 2 sets of discharge points respectively discharge, supercharger.	1	0.0
B15	Pneumatic conveying (sending old sand)	Y918	transmitter 0.5m3, 2 sets of discharge points respectively discharge, supercharger.	1	0.0
B16	SZ2512L fixed sand mixer	10T/H	Capacity: 10T. Radius of rotation: 3000 mm, radius of rotation of small arm 1800 mm, height of sand outlet 1600mm, liquid bucket, resin pump, electronic control, etc. For core making.	1	21.5
B17	Vibrating Table	Z292	vibrating table 1200x2500mm, load 2t. Core making.	1	3.0
B18	S2530B fixed sand mixer	30T/H	Capacity: 30T.  Radius of rotation: 4000 mm, radius of rotation of small arm 2050 mm, height of sand outlet 1600mm, liquid bucket, resin pump, electronic control, etc.	1	45.6
B19	Vibrating Table	Z2920	Table: 3800x3800mm,load: 20 t.	1	13.0
B20	Dust collector	MC80	For dust collecting of pneumatic transmission part	2	15.0
B21	Pulse back-blowing bag-type dust collector	FD630	For dust collecting of sand shakeout;Filter area 486 square meters, air volume: 55000m^3/h.	1	0.0
B22	Fan		Muffler, damping pad, etc. 4-72NO12C,75 Kw	1	75.0
B23	Scrap iron hoisting system		It is composed of 1t electric hoist, guide rail, bracket, etc.	1	3.0
B24	level-sensing device	C18	Check whether the material is present or not.	20	0.0
B25	Pneumatic control system		It is composed of air control box, triplet, solenoid valve, ball valve, pipe joint, etc.	10	0.0
B26	PLC system		PLC integrated block Omron, the main electrical components are domestic famous brand, electric cabinet, hand control table, switch, analog screen, etc.	1	0.0
F01	Non-standard steel structure		Sand bank, platform, cover plate, dust-removing air pipe, pneumatic conveying pipeline, etc., and the buyer is provided with.	0	0.0
	Subtotal				332.0
			Chromite sand separation equipment
C01	Chrome ore separator		Productivity 10T/h, selection rate ≥ 75%, imported equipment	1	10
	Total