CCM: Fix steel frame support,Rigid Dummy bar
Oscillation control: Frequency conversion PCL control(Siemens or Delta products)
Withdrawal and straightening form:Frequency conversion PCL control(Siemens or Delta products)
Dummy head withdrawal and straightening : PCL control
Cutting: by manual cutting .
Billet size 80x80mm with 6meter length,and so on
Strand 1 strand
Cooling bed: Transverse pusher(hydraulic) cooling bed
Steel grader : Q215,Q235,20MnSi,45# and so on
Public service parameter
Water system require
A. Mould cooling water:P≥0.9Mpa,Q≥100 Nm 3/h
B. Twain cooling water: P≥0.6Mpa,Q≥30 Nm3/h
C. Machine cooling water: P≥0.6Mpa,Q≥20Nm3/h
Gas system
A. Oxygen(incise):P≥0.6Mpa,Q≥2.0Nm3/min
Pure≥99.5%
B. Compress air: P≥0.5Mpa,Q≥1.0Nm3/min
C. Burn gas: P≥0.3Mpa,Q≥1.0Nm3/min
Power system
Continue casting main body equipment power consumption ≥60KW 380V 50Hz
CCM public service, water supply, compressor system
| Equipment Name |
Equipment Name |
| 1. Equipment foundation and civil works |
11. Dummy bar |
| 2. Steel structure platform |
12. Dummy bar storage device |
| 3. Casting radius |
13. Withdrawal straightening machine |
| 4. Strand number |
14. Approach roller table |
| 5. Ladle support |
15. Automatic cutting machine |
| 6. Tundish |
16. Transmit roller table |
| 7. Tundish car |
17. Cooling bed |
| 8. Mould |
18. Pusher |
| 9. Oscillation device |
19. Hydraulic system |
| 10. Secondary cooling system |
20. Computer and PLC system |
| 21. Tundish roaster |
|
1. Strip plate mould of the entirety copper-tube mode which is simple and low cost.
2. High-frequency and small-swing plate spring vibration, the depth of vibration mark is under 0.2mm.
3. The simplified billet guiding device is low cost and easy maintenance.
4. Five-roller and four-drive straightening machine is of the large straightening.
5. Auxiliary straightening machine can re-straighten the billet in emergency.
6. Stainless steel cutting machine can cut-to-length accurately.
7. The coping rate in the surface is less than 5%.
8. Computer and PLC system
9. Tundish roaster
Induction furnace is used for smelting or insulating ferrous metals, non-ferrous metals, sponge iron, such as scrap iron, scrap steel, copper, aluminum and so on. Complete working equipment such as continuous casting machine, rolling mill, mainly used for the production of billet, steel bar, angle steel, H-beam, I-beam, etc. Using KGPS, IGBT, single or double power supply technology, PLC (Siemens) can be realized throughout the monitoring.
){kind=link}
){kind=link}