Deep Well Pump Motor High Quality

• Customization: Available
• Application: Industrial
• Speed: High Speed
• Model NO.: YLB
• Number of Stator: Three-Phase
• Function: Driving
• Casing Protection: Protection Type
• Number of Poles: 4
• Starting Mode: Variable Frequency Starting
• Certification: ISO9001, CCC
• Brand: Semc
• Product Name: Ylb Series Deep Well Pump Motor
• Brand Name: Semc
• Color: Red Blue
• Voltage: 380V, 400V, 220V 230V, 415V, 440V, 619V
• Frequency: 50/60Hz
• Insulation: F
• Transport Package: Plywood
• Specification: 500kg
• Trademark: SEMC
• Origin: China
• HS Code: 43254229
• Production Capacity: 100
• Package Size: 265.00cm * 325.00cm * 475.00cm
• Package Gross Weight: 500.000kg

Product Description

The special series of three-phase asynchronous motors for deep well water pumps are three-phase asynchronous motors with a squirrel-cage rotor structure. This series of motors is suitable for machines and devices with large axial force. Its installation dimensions comply with IEC standards or NEMA standards, and the protection levels can be produced according to customer requirements: IP55, IP23, and IP67.
The motor is used under the following conditions:
Ambient temperature: no more than 50ºC
Altitude: no more than 1000 meters
Frequency: 50Hz, 60HZ
Voltage: 380V, 400V, 220V 230V, 415V, 440V, 619V
Connection method: Y connection method for 3KW and below, △ connection method for above 3KW or according to customer requirements
Working mode: S1 (continuous working)
Insulation class: F
2. Things to note before installation
2.1 Before opening the outer packaging, check whether the outer packaging of the goods is intact and whether the goods are damaged.
2.2 After opening the package, carefully clean the oil and dust from the motor casing.
2.3 Check the nameplate to see if it matches the equipment.
2.4 Carefully check whether the motor is damaged, whether the fasteners are loose, or whether they were lost during transportation. Turn the rotor by hand to check whether the rotation is flexible.
2.5 Use a 500-volt megger to measure the insulation resistance of the coil to the shell. The value should not be less than 1 megohm. Otherwise, the stator should be dried at a temperature not exceeding 120°C.
3. Installation of electric motor
3.1 Screw the coupling screw into the pump coupling and keep it vertical
3.2 Remove the cap on the top of the motor
3.3 Clean the installation surface, install the motor vertically through the pump connecting rod on the bottom flange support surface, and tighten the fastening bolts