Product description
Injection molding machine is to use compressed air to inject molding sand evenly into the sand box for pre compaction, and then apply pressure for compaction. There are two kinds of injection molding machines in common use: vertical type and horizontal type. The vertical parting non box injection molding machine does not use a sand box for molding, and the molding sand is directly injected into the molding room with a template. The size accuracy of the sand mold is high, there are cavities on both sides of the sand box, and the productivity is high, but it is difficult to lower the core, and the quality requirements of the molding sand are strict. The horizontal parting and decanting injection molding machine uses the sand box for molding. After the sand mold is made, the final closing and decanting is convenient for core lowering and high productivity.
| Product Name |
horizontal Parting hot Dual-position core shooter |
| Application |
The multi-purpose core shooter has a wide range of applications and high productivity, which is suitable for shooting sand cores under 80kg. The form of its sub box is a four opening mold, which can be used either vertically or horizontally. The multi-purpose core shooter is equipped with the most commonly used electric heating and temperature automatic controller of the hot core box, and the user can also provide the gas heater instead of the electric heater. The electric control system is controlled by a programmable controller, and the electric control box is equipped with a door opening and power-off interlock device to ensure convenient and safe maintenance. |
| Mold |
Z954 |
Z955 |
Z956 |
Z957 |
Z958KF |
| Template size |
500*330 |
550*400 |
650*400 |
800*400 |
1000*800 |
| Sand shooting amount KG |
20 |
25 |
25 |
25 |
30 |
| Sand bucket capacity |
200 |
200 |
200 |
200 |
200 |
| Control method |
Auto / manual |
Auto / manual |
Auto / manual |
Auto / manual |
Automatic / manual hydraulic |
| Installed power |
20KVA |
20KVA |
30KVA |
30KVA |
30KVA |
Z86f series core shooter is vertical parting core shooter and its shape. The whole machine is mainly composed of four parts.
1. Column parts: the upper frame of the equipment is mainly composed of beams and columns. The crossbeam is equipped with sand cylinder, sand hopper, sand valve components, compression cylinder and other components to form the sand supply and air supply system for core making.
2. Sand injection device: it consists of sand cylinder, air valve, sand cylinder frame, injection head, sand injection plate and other components. During operation, the sand cylinder is pressed on the upper plane of the core box by the pressing cylinder, and the sand injection valve is opened for sand injection. After the completion of sand blasting, loosen the compression cylinder (return to the original position) to complete sand blasting and sand adding.
3. Mold base parts: mainly composed of moving template, left and right support plates and guide pillars, guide sleeve, ejector pin, mold cylinder and other parts.
3.1 the whole mold base is installed on the base by left and right support plates.
3.2 the moving formwork moves left and right along the guide post under the pushing and pulling of the closing die to complete the core making process of the closing and opening die. When the movable formwork is opened, the sand core on the top core plate is ejected from the top bar on the fixed formwork, which can be easily taken out by hand.
3.3 base: the support, mold base, column, electric control box, solenoid valve, etc. of the whole equipment are installed on it.
Product Show
:
Audited Supplier 
){kind=link}