Closed cooling tower model FBN-200
Closed cooling tower flow / wet bulb temperature 200 (t / h) / 28 ºC
Cooling capacity of 1163KW
Overall dimensions (length × width × height) 5600 * 2200 * 3800
Pipe diameter into the outlet (mm) DN200
Overflow outlet (mm) DN40
Outfall (mm) DN65
Replenishment port (mm) DN32
Pump manufacturers Boli source
Spray pump model PDM150-3.7
The number of 1 Taiwan
Single pump flow 180m3 / h
Motor power 3.7kw
Fan manufacturer Ashland Model YSL2000-7.5
The number of 2 units
Motor power 7.5 kW
Structure Features Direct connection IP55 F rating
Heat exchange tube (plate) structure coil
Pipe diameter 19 mm
A cooling tower isdesigned to remove heat from a building or facility by spraying water down through the tower to exchange heat into the inside of the building. Air comes in from the sides of the tower and passes through the falling water A cooling tower is a heat removal device that uses water to transfer process waste heat into the atmosphere. Likewise, an industrial cooling tower operates on the principle ofremoving heat from water by evaporating a small portion of water that is recirculated through the unit.
This equivalent ton is defined as the heat rejection in cooling 3 US gallons per minute (11 litres per minute) or 1,500 pounds per hour (680 kg/h) of water by 10 °F (5.6 °C), which amounts to 15,000 British thermal units per hour (4.4 kW), assuming a chiller coefficient of performance (COP) of 4.0.
There are three main types of cooling towers that are defined by how water or air pass through them. These types includecrossflow, counterflow, and hyperbolic. There are also two varieties classified solely on airflow, known as induced draft and passive draft cooling towers.
Audited Supplier 
){kind=link}