5000kw DC Engine 5MW DC Motors

• Customization: Available
• Operating Speed: Low Speed
• Excitation Mode: Compound
• Model NO.: YRKK-128
• Casing Protection: Protection Type
• Number of Poles: 12
• Structure and Working Principle: Brush
• Type: Z4
• Certification: ISO9001, CCC
• Brand: Semc
• Name: DC Engine 5MW DC Motors
• Power: 5000kw
• Voltage: 930V
• Rated Speed: 65rpm
• Frequency: 50Hz
• Duty: S1
• Transport Package: Pollywood
• Specification: 5000KW DC engine 5MW dc motors
• Trademark: SEMC
• Origin: Shanghai
• Production Capacity: 500

Product Description

Technical Data:


CCM: Fix steel frame support,Rigid Dummy bar
Oscillation control: Frequency conversion PCL control(Siemens or Delta products)
Withdrawal and straightening form:Frequency conversion PCL control(Siemens or Delta products)
Dummy head withdrawal and straightening : PCL control
Cutting: by manual cutting .
Billet size 80x80mm with 6meter length,and so on
Strand 1 strand
Cooling bed: Transverse pusher(hydraulic) cooling bed
Steel grader : Q215,Q235,20MnSi,45# and so on
Public service parameter
Water system require
A. Mould cooling water:P≥0.9Mpa,Q≥100 Nm ³/h
B. Twain cooling water: P≥0.6Mpa,Q≥30 Nm³/h
C. Machine cooling water: P≥0.6Mpa,Q≥20Nm³/h

Gas system
A. Oxygen(incise):P≥0.6Mpa,Q≥2.0Nm³/min
Pure≥99.5%
B. Compress air: P≥0.5Mpa,Q≥1.0Nm³/min
C. Burn gas: P≥0.3Mpa,Q≥1.0Nm³/min
Power system
Continue casting main body equipment power consumption ≥60KW 380V 50Hz
CCM public service, water supply, compressor system
 

Equipment Name	Equipment Name
1. Equipment foundation and civil works	11. Dummy bar
2. Steel structure platform	12. Dummy bar storage device
3. Casting radius	13. Withdrawal straightening machine
4. Strand number	14. Approach roller table
5. Ladle support	15. Automatic cutting machine
6. Tundish	16. Transmit roller table
7. Tundish car	17. Cooling bed
8. Mould	18. Pusher
9. Oscillation device	19. Hydraulic system
10. Secondary cooling system	20. Computer and PLC system
21. Tundish roaster

1. Strip plate mould of the entirety copper-tube mode which is simple and low cost.
2. High-frequency and small-swing plate spring vibration, the depth of vibration mark is under 0.2mm.
3. The simplified billet guiding device is low cost and easy maintenance.
4. Five-roller and four-drive straightening machine is of the large straightening.
5. Auxiliary straightening machine can re-straighten the billet in emergency.
6. Stainless steel cutting machine can cut-to-length accurately.
7. The coping rate in the surface is less than 5%.
8. Computer and PLC system
9. Tundish roaster
Induction furnace is used for smelting or insulating ferrous metals, non-ferrous metals, sponge iron, such as scrap iron, scrap steel, copper, aluminum and so on. Complete working equipment such as continuous casting machine, rolling mill, mainly used for the production of billet, steel bar, angle steel, H-beam, I-beam, etc. Using KGPS, IGBT, single or double power supply technology, PLC (Siemens) can be realized throughout the monitoring.

Main supply list: 2 sets of electric furnace body, 2 sets of hydraulic or mechanical tilting electric furnace mechanism, 1 set of control platform, 1 set of intermediate frequency control cabinet (6 pulse 1, 12 pulse 2, 24 pulse 4), low voltage control cabinet (6 pulse 1, 12 pulse 2, 24 pulse 4), 1 set of capacitor cabinet, 4 or 8 water-cooled cables; 1 water temperature alarm, 1 leakage alarm; 1 crucible mold, 1 liquid One batch of pressure steel pipe, one set of copper row, three water tanks. Transformer, cooling tower, furnace builder, furnace lining ejector, furnace cover